Pipe-Style Snow Guard Accessories page for assembly drawings

The purpose of End Collars is to keep the pipes from sliding though the snow guard brackets. An End Collar is required for each end of each pipe on each run of snow guards. A run should not exceed 100’ to allow for thermal expansion.

End Caps keep moisture and insects from getting inside of the pipes.

The Internal Couplings are used to join pipes together. Internal Couplings come assembled and ready for installation. Do Not Over-Tighten prior to inserting the coupling into the pipe. Over tightening the bolt will cause the gasket to expand and make installation of the coupling difficult.

The External Couplings are used to join pipes together. Install pipe and slide external coupling over the end until the pipe end contacts the dimple.

Ice Flags hang from the pipe between the brackets to help keep ice and snow from sliding underneath. The Ice Flags should be placed over the top or middle pipe on two-pipe or three-pipe systems.

Ice Screen comes in 4’ lengths, 5” high; for most installations it will need to be cut to size to fit between the snow guard brackets. Each length of Ice Screen includes 4 U-bolts, 4 backing plates and 8 locking nuts.